Closed
Hi since you resurfaced the a427 turn on to the B669 to Wilbarston
Reported in the Road Markings - Worn/Faded category anonymously at 14:42, Thu 24 October 2019
Sent to Northamptonshire Highways 4 minutes later. ref: 1817998.
The new turn into the B669 is shortened by about 20 metres meaning you now have to brake on the A427. This creates a danger of vehicles running into your rear end
Updates
-
Thank you for reporting a fault. We will use the information you have provided to assess and prioritise this fault in accordance with our published response times for fault reports.
State changed to: Investigating
Posted by Northamptonshire Highways at 14:45, Thu 24 October 2019
-
Thank you for your enquiry to Northamptonshire County Council’s Street Doctor Service with regard to the change in the roadmarkings at the A427 / B669 junction at Wilbarston following the recent surface dressing works. This has been passed over to our section who organised the surfacing works, and who have records of the original roadmarking layout, and will investigate this further and take action as necessary.
Posted by Northamptonshire Highways at 09:25, Fri 25 October 2019
-
This report has been assessed and a job for repair has been raised.
State changed to: Action scheduled
Posted by Northamptonshire Highways at 09:25, Fri 25 October 2019
-
The white hatching is there to indicate the delineation between both right turns at the staggered junction. This is to indicate to motorists not to stray into the turning lane ahead of the junction, where potentially they could meet an oncoming vehicle turning in the opposite direction. The white lining offers a visual deterrent and not a physical deterrent, therefore they are to remain.
Posted by Northamptonshire Highways at 15:04, Wed 30 October 2019
-
Following an on-site risk based assessment there is no action required at this time.
State changed to: No further action
Posted by Northamptonshire Highways at 15:03, Fri 26 February 2021
This report is now closed to updates from the public. You can make a new report in the same location.