Back to all reports

Filled trench sinking causing pot hole

Reported in the Potholes / Highway Condition category anonymously at 16:30, Thursday 23 January 2020

Sent to Northamptonshire County Council 5 minutes later. ref: 1957319.

On the side furthest from the ford factory, a trench which has been filled is now either sinking or breaking away causing pot holes in line with both car wheels. Previously raised a few days ago, response was ‘not councils responsibility’, if it isn’t then can you clarify who’s responsibility it is and that you have notified them of the issue?

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for reporting a fault. We will use the information you have provided to assess and prioritise this fault in accordance with our published response times for fault reports.

    State changed to: Investigating

    Posted by Northamptonshire County Council at 16:35, Thursday 23 January 2020

  • Thank you for your update the locations were forwarded to the developer for investigation and action. these are works linked to the canmoor development going forward.

    Posted by Northamptonshire County Council at 12:37, Tuesday 28 January 2020

  • I hit this pot hole the other day, this is the damage it has caused. A few hundred pounds worth of damage caused, including new tyre, wheel, coil spring , wheel bearing and recovery fee. I would like to file a claim for this as the location of this pot hole has been known about since January 2020.

    Posted anonymously at 08:04, Wednesday 11 March 2020

  • Thank you for your update Please forward any information to Insurances@kierwsp.co.uk and colleagues will send you out a claim form

    Posted by Northamptonshire County Council at 11:02, Wednesday 11 March 2020

  • Following a review this issue is not a Northamptonshire County Council responsibility.

    State changed to: not the council's responsibility

    Posted by Northamptonshire County Council at 11:02, Wednesday 11 March 2020

This report is now closed to updates. You can make a new report in the same location.