Back to all reports

Pedestrian crossing signal doesn't show when to cross

Reported in the Signal Failure category anonymously at 21:15, Thursday 25 June 2020

Sent to Northamptonshire County Council less than a minute later. ref: 2172931.

Lights 20 and 23 end of warkton lane and Barton road. Pressed the crossing button showed red. Traffic flow continued as usual red turned off no green cross light shown traffic still flowing

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for reporting a fault. We will use the information you have provided to assess and prioritise this fault in accordance with our published response times for fault reports.

    State changed to: Investigating

    Posted by Northamptonshire County Council at 21:15, Thursday 25 June 2020

  • Engineer has attended site and checked operation of all crossing points and is unable to find fault. This type of crossing has sensors to detect if people have pressed the button and walk off. Pedestrians must ensure they wait on the red paved area. If there is still an issue please raise a new report detailing the time of day the problem occured.

    Posted by Northamptonshire County Council at 22:30, Tuesday 30 June 2020

Provide an update

Your information will only be used in accordance with our privacy policy

Next: Tell us about you

or No personal details will be stored, and you will not receive updates about this report.

Your update

Tell us about you

Do you have a FixMyStreet password?