© NCC
You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Back to all reports

PO concrete slab not tarmaced in

Reported in the Slabs - Uneven / Damaged / Cracked category anonymously at 21:06, Sun 30 August 2020

Sent to Northamptonshire Highways less than a minute later. ref: 2270992.

Photo of this report zoom
Photo of this report zoom
Photo of this report zoom

City Fibre recently did some work in Jubilee Close. As you can see, the PO concrete slab has not been tarmaced in and finished off! This is a sever tripping hazard, especially for anyone who is disabled!

This is on the footpath in front of 1 Jubilee Close NN4 8RS.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for reporting a fault. We will use the information you have provided to assess and prioritise this fault in accordance with our published response times for fault reports.

    State changed to: Investigating

    Posted by Northamptonshire Highways at 13:05, Mon 31 August 2020

  • This report is under further investigation.

    State changed to: Under further investigation

    Posted by Northamptonshire Highways at 16:29, Tue 1 September 2020

  • Thank you for your enquiry, a works order has been raised for repair, to be completed within the next 28 days

    State changed to: Action scheduled

    Posted by Northamptonshire Highways at 13:45, Mon 7 September 2020

  • As part of a system review we have noted that this report has remained open and we have now closed the report to future updates. If for any reason you believe that the report should not have been closed please raise a new report. Please provide the old reference number and an explanation as to why you believe the report should not have been closed so we can investigate this further.

    State changed to: Closed

    Posted by Northamptonshire Highways at 15:44, Wednesday 30 March 2022

This report is now closed to updates. You can make a new report in the same location.