Incorrect sign showing
Reported via iOS in the Damaged / Missing / Facing Wrong Way category anonymously at 10:52, Sat 7 November 2020
Sent to Northamptonshire County Council less than a minute later. ref: 2374974.
An old 40mph sign which was previously covered over by black plastic is now showing as the plastic has torn. Now when entering High Road from Mallory Way it looks like the speed limit is 40mph when it is actually 30mph. The whole sign needs removing not covering with plastic.
Thank you for reporting a fault. We will use the information you have provided to assess and prioritise this fault in accordance with our published response times for fault reports.
State changed to: Investigating
Posted by Northamptonshire County Council at 10:52, Sat 7 November 2020
Thank you for reporting this issue. This road is not yet adopted and so remains the responsibility of the developer. They have been notified of the need to remove the sign following the change in speed limit. I have also asked colleagues to make them aware that the torn plastic needs replacing (or preferably the sign should be removed, as you suggest).
Posted by Northamptonshire County Council at 10:29, Mon 9 November 2020
Still open, via questionnaire, 14:02, Sat 5 December 2020
Following a review this issue is not a Northamptonshire County Council responsibility.
State changed to: not the council's responsibility
Posted by Northamptonshire County Council at 16:11, Fri 18 December 2020
This report is now closed to updates. You can make a new report in the same location.