You can move around with your keyboard
Drop pin on the map to start a new report
Press space again to adjust the location
Start new report here Reposition report here
Back to all reports

Debris left behind after installation of pavement

Reported via mobile in the Weeds category anonymously at 07:04, Tue 17 August 2021

Sent to Northamptonshire Highways less than a minute later. ref: 2939804.

The photos show vegetation and rubble left behind by highways workmen after installing a stretch of pavement. It is likely to impede drainage of the road into the brook, at a location that has flooded regularly in recent years. Could this unsightly mess be cleared up please? Pavement is fab though!

RSS feed of updates to this problem Receive email when updates are left on this problem.


  • Thank you for reporting a fault. We will use the information you have provided to assess and prioritise this fault in accordance with our published response times for fault reports.

    State changed to: Investigating

    Posted by Northamptonshire Highways at 07:04, Tue 17 August 2021

  • Thank you for your enquiry, after checking through our post completion site photos that were taken before we left site. We believe that the waste that was reported within the verge in Townsend Lane was put there by an unknown source after we had left site and subsequently was not left by our sub-contractor. Photos available on request

    Posted by Northamptonshire Highways at 16:14, Fri 10 September 2021

  • As part of a system review we have noted that this report has remained open and we have now closed the report to future updates.

    If for any reason you believe that the report should not have been closed please raise a new report.

    Please provide the old reference number and an explanation as to why you believe the report should not have been closed so we can investigate this further.

    State changed to: Closed

    Posted by Northamptonshire Highways at 13:54, Tuesday 21 March 2023

This report is now closed to updates. You can make a new report in the same location.